Make sure the walls to be made are completely clean and engraved so that you get maximum lock and suction between the stucco and masonry. Break any old plaster or loose mortar. Remove all growth or organic matter. If the stone has a smooth surface texture, break the front of the stone to create a plaster lock.

Fasten the vertical slats to the wall with a thickness of about 10 mm and about 900 mm and, if necessary, pack them to absorb the waves on the wall. You can also get the best architectural rendering services online.

When attaching the first lath to a corner or wall, make sure it is straight and upright, even if the walls are not straight. Each space between these screeds is filled separately. This method is the easiest way to ensure smooth and even rendering. Before you start, lightly spray the walls to keep them damp. This contributes to good suction power.

Add just the right amount of clean water to get the best mix that can be crushed, too wet it will fall and dry out and you won't be able to apply it (it will crumble). Also add waterproof plasticizer to the mixture. This prevents water from penetrating the finished plaster and increases flexibility

Usage: Load the falcon from above and load the mortar on the spoon. Build plaster with a bow and maintain a strong pressure. Build plaster on the wall between the slats.

Align this bottom layer by "seeing" the cut along the blade. When each compartment is full, scrape the surface with a wire scraper. Let it dry before removing the blade and filling it with the same mortar mixture.

In hot outdoor conditions, you may need to control excessive drying, shrinkage, and cracking by using a spray to keep the plaster damp (even if it's not soaked).